7 Best Headphones for EDM – Bassheads’ Favorites
Some may argue that EDM or electronic dance music is too repetitive or even simplistic overall. But, have you ever listened to it using the best headphones for EDM? The result might surprise you.
The genre can sound a lot more nuanced than casual listeners may think. The proper audio equipment can enhance and take advantage of the qualities of percussive electronics.
Take a look at the following headphones to see what I mean.
7 Best Headphones for EDM - Top Notch Listening Experience
Table of Contents
- 7 Best Headphones for EDM - Top Notch Listening Experience
- Headphones vs. Earphones
- Frequency Response Range – Don’t Dwell on It
- Wireless or Wired EDM Headphones?
- Comparing Extra Perks
- How Important is the Padding?
If you’re looking for a deep bass experience, the Audio Technica WS1100iS may be the headphones for you. These are equipped with the company’s 53mm Deep Motion Hi-Res audio drivers. Armed with powerful magnets, the drivers are responsible for enhancing the music’s low-end definition.
Despite the bass heavy presentation, there’s a nice balance to the sound overall. Thanks to the rigid housings and the aluminum stabilizer, there isn’t a lot of vibrational energy to worry about. What I like even more is the bass venting system. Combined with the high-end drivers, this helps to optimize air damping and enhance the bass definition even more.
In terms of comfort, You can use these headphones for hours at a time without feeling much head or ear pressure. However, the dual-layer earpads only provide sound isolation. They do little to optimize or create a balanced environment for the sound playback.
At the end of the day, however, you won’t really need that for EDM auditions.
The Sennheiser HD 25 headphones are great for almost any type of music. While not specifically optimized for EDM, they are versatile and capable of delivering clear audio and excellent bass response.
The design is particularly interesting since it can accommodate high sound pressure levels (SPL’s). I like how comfortable the headphones are, which is hands down better than the standard model and almost as good as the premium version, the HD 25 Plus.
You may also like that these headphones feature single-ear listening. This makes them more versatile than your garden-variety bass heavy headphones, for EDM or otherwise, since you can use them for mixing too. Although the overall build quality may not be too impressive by Sennheiser standards, I have to admit that the ergonomics and lightweight of the HD 25 more than compensate for it.
These over-ear headphones are as rugged as they come. Whether you want to listen to bass heavy music in the comfort of your own home or in a club, these bad boys can handle a lot of abuse.
The 45mm drivers in the MSR7 SonicPro headphones are Audio Technica’s latest True Motion Drivers. As you might guess, drivers that can move with higher precision and amplitude are capable of high-fidelity audio and superior bass reproduction.
The earpads feature memory foam – they’re soft and prevent you from feeling any undue ear pressure from long hours of continuous use.
What’s also nice is that the headphones come with three detachable cables, one of which is compatible with smartphones. This is a high-value perk that helps to justify the higher price tag of the MSR7 SonicPro.
These headphones are great at both low and higher-end frequencies. So, you could use these headphones for gaming too. Last but not the least, a carry case is also included.
The Sony MDR-XB50AP is a pair of extra bass earphones that I’m partial to in light of their lightweight nature and sleek look. And, did I also mention that these earphones are cheap too?
If you’re not a fan of large over-ear and over-head headphones, you might appreciate the MDR-XB50AP. These earbuds do not sacrifice much compared to a pair of quality headphones and they’ve been designed to emphasize the lower register. This is, after all, very important in EDM. And, you shouldn’t let the 12mm dome drivers fool you. They sit closer to your eardrum and pack a hell of a punch.
For comfort, the tips of these earbuds are made of a hybrid silicone material, which is flexible and not too hard to accommodate most ear canals.
The powerful neodymium magnets ensure plenty of volume and minimal distortion even at high volumes. I wouldn’t recommend cranking the music up too loud, though, if you don’t want to develop a headache.
Do Skullcandy headphones live up to all the hype? Let’s focus on this particular pair. It’s a wireless model at a mid-range price and rated at an impressive 40 hours of autonomy. Of course, it also offers an immersive audio experience with an emphasis on deep and punchy bass lines.
The memory foam earpads ensure comfort while also isolating the listener from outside noises. What I like even more is the built-in EQ that has the adjustable haptic bass feature.
With the ability to adjust the bass level relative to the other frequencies, you’ll be able to fine-tune your headphones for your favorite EDM tracks and whatever else you listen to.
The wireless connectivity is just icing on the cake in my opinion. While I don’t go giddy over wireless headphones, the 40-hour battery life is just too cool to pass up on at this price range. And, there’s also a built-in mic should you want to use these headphones for multiplayer gaming.
6. Sony XB950N1
Whoever said that wireless headphones are not great at reproducing low bass enough probably has never listened to some bass heavy tunes on the Sony XB950N1 headphones. If you want to talk about the ultimate freedom, punchy sound, and competent noise cancellation, these are the headphones for you.
The Sony XB950N1 headphones aren’t exactly cheap. But they don’t cost as much as audiophile headphones either and they pack quite a bit of technology. These headphones feature a standard frequency response range of 20Hz to 20kHz. It uses Bluetooth 4.1 technology for wireless operation, which makes for a much more stable connection than many similarly priced models.
I also like the patented Sony digital noise cancelling technology. While it’s not active noise cancellation, the digital noise cancellation feature and the well-designed earpads ensure reduce and cut off ambient noise from bleeding into the mix.
With an autonomy of up to 22 hours, minimal drops, and a wide range of on-ear controls, the Sony XB950N1 can easily become your favorite headphones for indoor and outdoor use, be it listening to EDM or anything else.
Here’s something you can use to listen to music from not one but two separate sources. That’s even more impressive in light of how affordable these OneOdio headphones are.
In terms of technical specs, the OneOdio headphones are defined by the 50mm drivers with neodymium magnets and single-side monitoring. The headphones feature two inputs, one on each earcup, for connection to two audio sources.
Swiveling earcups are another cool feature, one that any aspiring DJ should readily appreciate. The overall sound is very balanced throughout the whole spectrum.
Headphones vs. Earphones
Headphones can be well-padded and all, but at the end of the day, they’ll never be as light as earphones (also known as earbuds these days).
While traditional earphones may not be ideal for bass heavy genres, it’s not uncommon to find the bass-heavy ones on the market. If you think about it, it’s easy to emphasize the bass regardless of the bass extension.
In any event, choosing between the two types will have to come down to personal preference or budget. Earbuds are usually cheaper and easier to carry. At the same time, they lack the versatility of headphones, as well as SPL handling and noise cancellation (assuming that you’re not getting a pair of those super-duper earphones with advanced active noise cancellation).
Frequency Response Range – Don’t Dwell on It
If you’ve researched headphones before, you probably know that manufacturers list a variety of frequency response ranges. For your information, 20Hz to 20kHz pretty much covers the audible human hearing spectrum.
So, why bother to look for even wider ranges? It may provide some additional depth to the sound reproduction. For EDM bass, we’re not looking at anywhere 20Hz but midbass in the 60Hz to 150Hz range.
We actually don’t hear truly low bass of 40Hz and below. Rather, we feel them as a sort of rumble, such as when you’re listening to an explosion at a good movie theater.
That’s because low bass wavelengths are extremely long, over 55ft long at 20Hz. You can’t actually hear it, and no headphones can produce it when cupped over your ears, even if the manufacturers are able to measure it in the lab.
Wireless or Wired EDM Headphones?
Once again, there are pros and cons to both sides. Wireless headphones are getting a lot of traction lately. If you want to be able to walk around the house listening to your favorite EDM or other club music, wireless technology is the way to go.
However, wired headphones still reign supreme in my opinion. You can add an outboard headphone amp later on if you so wish, and they’re not as dependent on the source.
They’re often more rugged and better built, with no limit on drivers and such. That’s why wired EDM headphones are not necessarily cheaper than their wireless counterparts anymore.
Comparing Extra Perks
Things like built-in microphones are not as important as you think. They might be nice to have, but let’s face it. The recording qualities will not impress anyone.
Media control, on the other hand, is something that you might want to look into. Almost all wireless headphones come with that, by the way.
Another thing you may want to consider is adjustable bass. If you want an unparalleled experience, being able to fine-tune the bass level to your personal liking is going to be worth every dollar.
How Important is the Padding?
Set aside the comfort factor for a moment. The padding of the earcups also helps to keep ambient noise away, as well as to keep the music from escaping into the environment (the latter is usually not a concern in terms of audio quality, but it might annoy the people who happen to be around you when you’re blasting music). Without too much padding on your EDM headphones, you’ll eventually end up having a more natural and open soundstage.
This is not necessarily advantageous for EDM and club music in general if you’re looking for thumping bass (or midbass as I established above). Always aim for high-end padding if you want a bit of extra oomph with your EDM.
Are You Ready to Kick Things up a Notch?
As you can see, headphones for EDM can look like any other headphones on the market. The trick is to understand what’s under the hood. Not all 50mm drivers are the same and not all electronic calibrations offer the same audio reproduction quality.
The headphones in this article are mostly bass heavy - the exceptions are these as a way of presenting more options. Whether you want to work out or relax to your favorite tracks, you can hardly go wrong with any of the above.