Best Speaker Stands in 2020 for Optimum Audio Quality
You should know by now that playing with the angle and alignment of speakers can drastically change the sound quality. But how much do you know about using different heights to create a truly immersive listening experience?
Whether you have the best speaker stands on the market or you’ve made your own speaker stands, elevating even small bookshelf speakers can have a massive impact on your movie night, band rehearsals, or gaming sessions.
It has all to do with sound distribution. And, although it should be common knowledge, too few people realize that elevating speakers allows sound to travel in more directions. This can help to improve the soundstage, make dialogue more distinguishable, and help create fuller-sounding special effects.
9 Best Speaker Stands that I Stand By
Before you start experimenting, check out some of my personal favorites. There’s a pair of speaker stands in this article for everyone and every budget.
Table of Contents
- 9 Best Speaker Stands that I Stand By
- Design and Speaker Mounting
- Weight Limit Is Very Important
- Adjustable Height Is Key for High-End Configurations
- Elevate Your Speakers to Elevate the Sound
The HTBS speaker stands are my personal favorites. They’re very affordable and have a good amount of weight capacity for most satellite speakers. They come equipped with plain top plates and l-shaped brackets as well as keyhole mount adapters.
You can easily pair these with Bose, Sony, Klipsch, Polk, and other speaker brands. In terms of adjustments, you can position the speakers between 28 and 38 inches in height. This gives you a decent range to experiment with the listening experience.
The stands may be cheap but they’re nothing but sturdy. They’re made from heavy-gauge steel and also feature a heavy-duty oval-shaped base.
For removing clutter, the speaker stands are equipped with an integrated wire channel.
Reasonably priced and available in black and white finishing, the UFS-20 Series floor stands are a nice solution for both 2.1 and 5.1 home entertainment systems, but only for Bose speakers. The stylish design is something I appreciate as it makes generic cube speakers look more impressive.
The floor stands are 38” tall. The brackets are optimized for Bose entertainment systems. A very nice design feature is a hidden wire channel which has a decent opening. If you’re aiming to remove wire clutter, these stands can help you keep things neat.
If your system is Bose, then you’ll be hard-pressed to find a better solution to lift your speakers and improve the sound distribution around the room. Sturdy construction, sleek design, optimum height – you can’t ask for much more at any price.
The PSSS1 is a pair of speaker stands that impressed me a lot. First of all, they’re adjustable. You can set them between 30 and 45 inches tall. This opens up many possibilities when it comes to creating an immersive surround sound experience.
The triangle base is made of cast iron and offers good stability. A concealed wire channel is also used to help deal with clutter, if you’re not using a wireless system. Each stand can support up to 8lbs which is enough for smaller satellite and bookshelf speakers.
I also appreciate the multiple mounting options. The PSSS1 come with l-shaped, top plate, and keyhole mounting options which should give you good cross-brand compatibility.
This pair of Pyle speaker stands connected with me the most because of my passion for musical instruments. The adjustable speaker stands come with a minimum height of 40” but can be adjusted up to 71”.
Each telescoping stand comes with a heavy-duty tripod leg base. This allows each stand to hold a speaker of up to 132lbs. Obviously, this is massive for most home entertainment systems but not so much so if you have a home theatre.
I personally like them for their use in a home recording studio setting. The extra sturdiness and balance make the Pyle stands ideal for blasting loud music, using them as PA speakers, studio monitors and everything else along those lines.
And, even though they may not look great in most living rooms, you can still use them as the minimum height setting is still within optimum audio parameters. But the extra height would help with mounting side and rear surround sound speakers.
Although advertised as satellite speaker stands for clubs, these VideoSecu speaker stands fit in the same price range as most home entertainment speaker stands. Not only that, but they also have good cross-brand compatibility with most speakers. It's a great fit for turntable speakers.
The poles are a bit thicker than what most other stands in this price range come with. However, this does make it easier to conceal your wiring during the installation.
A very nice feature is the angle adjustment of the top plate. You can pan it 180 degrees and also tilt it 10 degrees to customize your listening experience. The height levels are between 26.5” to 47”.
The extra-wide base uses rubber feet to maintain stability and to protect the surface area. It’s good that you don’t have to buy other accessories if you move the stands from hard floor to a carpet.
This pair of speaker stands from Atlantic also has some cool things going for it. The first thing that caught my attention was the elevated base. It offers good stability and has a stylish design.
You can adjust the height of the speakers between 27 and 48 inches, depending on how big your room is. This should be more than enough for most living rooms to achieve an immersive surround sound.
The weight capacity tops out at 5lbs. The good news is that there are many highly capable mini satellite speakers in that weight class.
Wire concealment is also possible, which is always nice if you can get it. The stands are fairly sturdy and slim and have a sleek finish. They will look good in both modern and vintage decors.
This pair of Monolith 24” speaker stands was designed with all the top speaker manufacturers in mind. Regardless of what you have, chances are the stands will fit, as long as you keep in mind the 75lbs weight limit.
Supported by four steel columns, finished off with black powder coating, the Monolith 24” stands are very durable and impressively stable too. Since the columns are rectangular and have a unique design, you can even fill them with sand for additional stability and vibration resistance.
What’s even cooler is that the stands have spikes. These can be useful when you’re opting for rug placement. The stands can fit 8.5” x 6” speakers or slightly larger, as long they don’t exceed the reported weight limit.
While there is no wire management to speak of, you can wrap some Velcro straps around the wires to keep them concealed. I don’t find the lack of a wire channel a big drawback because the hollow columns will allow you to make the stands as heavy and as stable as you need, even for outdoor use.
If you’re going all out on Edifier gear for your home theater, you might as well consider the Edifier SS02 speaker stands. Designed with the S1000DB and S2000PRO speakers in mind, these easy to install speaker stands are among the sturdiest on the market.
The wood grain finish gives them a sleek look, one that also complements most Edifier speakers. A two-year warranty is also offered, which may not be a lot, at this price range, but it’s still a perk.
Each speaker stand is 14” x 11.4” x 25.6” (LWH). I find this to be a very good height for most living rooms, gaming rooms, and even small recording setups. Mind you that the height is not adjustable.
The 13.75” x 11” base plates offer impressive stability, while the 9.75” x 7” speaker plates offer sufficient compatibility with most of the popular home theater speakers and bookshelf speakers.
When it comes to the weight limit, each speaker stand can comfortably hold the popular S1000DB or S2000PRO speakers. Those are just under 40lbs. That said, you can probably put a bit more weight on them, just not too much.
The VIVO STAND-SP028s are universal speaker stands. Standing at 23” tall, the speakers are a hallmark of cross-brand compatibility. They can handle anything you throw at them like bookshelf speakers, satellite speakers, and the likes.
The base is a solid 10” x 10” square, which offers good stability without taking up too much floor space. As far as the speaker plate goes, this too is a square and measures 8” x 8”.
One of the best features, however, is the integrated channel, which can help with wire management and concealment. It may not be the easiest thing to do if you’re not technically savvy, but it’s very nice to have at this price range.
Design and Speaker Mounting
In terms of design, people may want different things. The majority of the consumer base tends to go for slim stands that just blend in with the furniture or scenery. However, some appreciate wider poles for extra stability as well as wire concealment possibilities.
Not all stands have a hidden wire channel. Some can’t make use of one because they are very slim while others may be designed with wireless speakers in mind. Either way, when you do find this feature, you won’t necessarily have to pay a premium for it.
When it comes to mounting, there are three basic ones – l-shaped, top plate, keyhole. In order to get the correct stand, you need to know how your home speakers can be mounted. There are many universal speaker stands out there but also quite a few that can present with mounting issues.
Weight Limit Is Very Important
Because people tend to pick slim speaker stands, unless they’re hardcore audiophiles who want the bulkiest standards for proper decoupling, getting the weight limit right is super important. A heavy-duty base, the wider the better, is also needed. A popular and reliable choice is a cast iron base. But that won’t do you much good if the pole can’t support the speaker.
Keep in mind that this is even more important when dealing with telescoping stands. Of course, if you need speaker stands for something other than your living room, say a recording studio or rehearsal space, you will need heavy-duty poles and almost always a tripod anchoring system or base.
Adjustable Height Is Key for High-End Configurations
Getting the sound distribution just right takes a lot of time even if you know your way around audio equipment. Each room benefits from specific configurations. To make your speakers shine and to get the most out of your surround sound system, positioning the speakers at the correct height is very important. This means somewhere around the height of your ears at your normal listening position.
This is often overlooked. A lot of people are content with putting speakers on shelves and tables. But, using speaker stands is a lot more effective. This properly decouples the speakers, which has the effect of minimizing cabinet vibrations. This results in a more faithful reproduction of music with less coloration.
Elevate Your Speakers to Elevate the Sound
The best options in speaker stands are the ones that truly improve the listening experience. Whether you’re gaming, watching movies, playing with your band, or recording an audiobook, speakers sound different at different heights.
The speaker stands in this article are reliable for leisure and professional activities. They’re also a very small price to pay for improving the audio quality and giving yourself a memorable listening experience every single time.