Do you scour garage sales and flea markets for vintage vinyl? Or, maybe you are part of the hip crowd that buys brand new remastered albums? Whatever your reasons are, your perfect playback depends on great speakers.
Building your vinyl rig and decided on your speakers? Don’t swipe that credit card just yet. Check out these best vinyl speakers for turntables. Your ears deserve the very best, and so does your vinyl.
Best Turntable Speakers - Get the Most Out of Your Vinyl
Take a look at these top speakers that even your resident audiophile will approve of.
Table of Contents
- Best Turntable Speakers - Get the Most Out of Your Vinyl
- A Detailed Buying Guide on Turntable Speakers
Want a nice marriage between analog and tech? The R1280T offers a standard speaker wire connection, but uses a remote control for volume.
In addition, this active nearfield monitor produces great sound for small spaces. The frequency response is 75Hz to 18kHz +/- 9dB. So, I found that most music had crisp highs and mids. The bass doesn’t go that deep, but it’s expected of small bookshelf speakers.
Along with the standard 3.5mm input, the R1280T speakers also have two sets of RCA inputs, a neat feature if you’d like to connect more than one device. The connectors are located on the back panel, along with the on/off switch. The bass, treble, and volume control knobs are located on the side of the right speaker.
The cabinets are made of MDF (medium-density fiberboard) in elegant wood finish. The included front grills sport minimalist, modern styling and are detachable.
They are 2-way speakers with a 4” cone driver and a 13mm silk dome tweeter. Also, the maximum power of the built-in amplifier is 21W per channel.
The Kanto YU4 Powered Speakers are big, loud, and offer an impressive soundstage. They’re particularly useful if you lack amplification and have a plug-and-play turntable.
They rock class D 70W amplifiers and feature 1” silk dome tweeters capable of delivering crystal-clear audio. In terms of range, these speakers are a bit more limited. The frequency response range of 60Hz to 20Khz may not be enough for records that need a bit more oomph in the bass department.
When it comes to design, the speakers look simplistic yet really well polished. Each one measures 5.5” x 7.5” x 8.7” and come in a variety of colors. I love the compatibility of the Kanto YU4 speakers with both modern and vintage turntables.
The integrated Bluetooth technology is great for streaming music, and the quality of the vocal midrange seems to fit the price range.
The Presonus Eris E3.5 speakers are an affordable option to link up with your record player. These robust, nearfield monitors are built around woven composite woofers which have no issues pumping out detailed low-frequencies without the risk of distortion.
In the high-end, the Eris E3.5s utilize slik-dome tweeters for a full-bodied, balanced output. Another great feature of these dpeakers is the acoustic tuning controls which allow you to cut out problematic frequencies, much like an EQ unit. This helps to avoid unwanted boom depending on the location of your turntable.
Despite their relatively small size, the speakers certainly pack a punch. Offering 50 watts of solid Class AB simplification, the E3.5s retain their clarity even when pushed to their volume limit. You can also set the gain to unity mode, which restricts the volume but compresses the audio to compensate.
One of the main reasons we love to listen to records through turntables is the small details you get to hear that don’t exist on digital mediums. The Presonus E3.5s are outfitted with both unbalanced RCA and balanced TRS inputs, so they are easy to hook up to your turntable and enjoy the sound of your favorite vinyl’s instantly.
4. Sony SSCS5
The Sony SSCS5 speakers are best defined by their wide frequency response range of 53Hz to 50KHz. This enables the speakers to provide a very airy sound signature while capturing with accuracy all the important details of every register.
Of course, as 3-way speakers, the SSCS5s have another advantage. They have 3 drivers and 2 crossover points, which allows for much better instrument separation. Something you will notice when listening to vinyl albums.
Rated at 6ohm impedance, the SSCS5 3-way speakers are all about rich and colorful acoustics. The cabinet design is just as responsible for the improved audio quality as all the technical specifications. Also important to note is Sony’s Hi-Res Audio feature which is synonymous with accurately capturing the sound signature of vinyl music.
The SSCS5 speakers are equipped with fiber-reinforced woofers, which offers superior rigidity and less breakup when reproducing lots of bass. This will come in handy when you’re trying to drive more bass or when you’re trying to speed up the breaking-in period of your turntable speakers.
JBL’s 305P MkII active studio monitors are an ideal set of speaker for pairing with a turntable. With JBL’s Image Control Waveguide they provide a dimensional stereo image that boast clarity and power.
These speakers produce impressive accuracy in the low frequencies, and a smooth treble output.
With the 305P MkII monitors, you get a broad sweet spot which reduces the variation caused by moving around the room where you have your turntable set up.
This is a useful attribute if your room isn’t perfectly acoustically treated, and avoids common problems such as bass traps from occurring due to the shape and dimensions of your listening space.
The ported design of these JBL speakers means you don’t need to crank the volume to get a good overall balance. If you enjoy listening to records in the background or don’t want to disturb neighbors, the featured Slipstream low-frequency port ensures that you get detailed bass response at low volumes.
Looking at the technical aspects of these speakers, they have a 5 inch woofer for bass reproduction, a 1 inch tweeter driver to power the high-end frequencies, and a maximum volume peak of 108db. This volume limit is more than enough to blast records on your turntable at a gathering or outdoor party.
6. Micca PB42X
The Micca PB42X speakers are highly versatile speakers for home use. They deliver a rather clean, or natural, sound signature which lends to multiple genres.
These are not the most powerful speakers you can pair with your turntable. However, the PB42X are active speakers. Therefore, they may be the ideal choice if you’re looking to invest less in your audio setup.
On top of that, the frequency response range of 60Hz to 20KHz should be enough to satisfy most genres in your vinyl collection.
The ported enclosure design slightly enhances the bass response and lowers distortion when playing the speakers at higher volumes. The compact build is also helpful if you’re low on table space too, not just cash.
Edifier’s R1700BT speakers are among my favorite powered bookshelf options. They’re slick, modern, and come with a multitude of connection options. The letters “B” and “T” in their name stand for “Bluetooth”, meaning that you can connect the R1700s to your smartphone via Bluetooth like the rest of their “BT” brethren.
The speakers are two-way with a 4” woofer and a ¾” silk dome tweeter. The woofer, while not the biggest in the bookshelf class, offers more-than-decent low end. The frequency range is 60Hz to 20kHz. The built-in amplifier supplies four channels of amplification, one to each driver: 15W for each tweeter and 18W for each woofer (RMS power).
The elegant cabinets are made of MDF, with side-mounted vol/treble/bass controls and a rear-mounted connection panel. Like the rest of the BT models, they are finished in black with wood side panels. Each speaker measures 9.84” tall, 6.1” wide, and 8.35” deep.
The Mackie CR5-XBT monitors are kitted out with modern features which are highly compatible with a turntable, especially if you like to listen to records in an intimate setting.
With a conveniently designed front-panel headphone output, you can listen to music at night without worrying about disturbing other people. These speakers also have built-in Bluetooth connectivity so you can use them for any device as well as a turntable.
In terms of outputs, you get an RCA to 1/8 inch cable. These small speakers are powered by a single amp, but this doesn’t diminish the quality of response they produce. The 5 inch low frequency woofer gives you crisp bass, and the silk-domed high frequency driver with a 0.75 inch tweeter produces detailed transients in the high end. Although these Mackie speakers aren’t capable of the volume of larger monitors, they are perfect for relaxed listening from your turntable.
The T15 by Polk Audio offers a good option for buyers who want an all-in-one option. These are mini-monitors designed to work in a surround sound system, but I found they work well by themselves, too.
They are mountable on the wall and are relatively balanced sound-wise. These speakers don’t come ready to use, though.
You may need to make a trip to the store to pick up some quality speaker wire first, as well as a receiver or amplifier if you don’t have one already.
The T15 speakers can handle to 100W of power. These are not active speakers so you have to supply your own amplifier (at least 20W per channel recommended).
These speakers are two-way with a 5.25” cone driver and a ¾” silk dome tweeter. The frequency range is 65Hz to 20,000Hz and the nominal impedance is 8Ω – these small speakers are easy to drive and the sensitivity is reasonable at 89dB.
The MDF cabinets are 7” deep, 6.5” wide, and 10.5” tall. The elegant black finish and grills will look cool in any environment.
10. Audioengine A5+
Audioengine’s A5+ are powered and don’t need an amplifier, making them perfect for vinyl lovers looking to set up a pure vinyl rig with just a turntable and a pair of speakers (assuming the turntable has a built-in phone preamp).
The two-way speakers come with 5” Kevlar woofers and ¾” silk dome tweeters. The built-in amplifier is rated at 50W per channel RMS, which is enough to fill a medium-sized room. The frequency response range is 50Hz to 22kHz.
Each A5+ speaker measures 10.75” tall, 7” wide, and 9” deep. The left speaker (the one where the amplifier’s located) weighs 15.4lbs, while the right one weighs 9.6lbs. The available color options include high-gloss white, solid carbonized bamboo, and satin black.
11. Klipsch R-15M
Are you familiar with your speaker’s tweeters and woofers? Because the R-15M has special ones that may blow your old ones out of the water. They bring balanced sound to a whole new level.
These are still bookshelf speakers for small to medium rooms. But the speakers’ highs and mids are clear and sharp for better sound clarity.
Klipsch installs a 5.25” woofer with copper-spun cone and a 1” horn-loaded aluminum tweeter on these bad boys. The tweeters feature Klipsch’s own Tractrix horns which enables them to put out some pretty impressive high and upper midrange.
The MDF cabinet has a rear-firing port. Brushed black polymer is the only available color option, which gives a nice contrast to the copper-colored cone. Detachable grills are also included. The R-15M speakers are 12.5” tall, 7” wide, and 8.11” deep and weigh 10.3lbs.
These are non-powered speakers so you’ll have to hook them up to an amplifier or receiver. The R-15M’s maximum power handling is 85W continuous or 340W peak. The frequency response is 62Hz to 24kHz. The sensitivity is very high at 94dB thanks to the horn design.
12. Fluance Ai40
If pricing is way down on your list of concerns, then you might be interested in a pair of speakers that can really put out an impressive output. The Fluance Ai40 2-Way speakers are active speakers with a 35W class-D amplifier that might just save you a lot of money in the long run. Or if you’re currently operating with a poor amp.
The speakers are also Bluetooth-enabled. The frequency response range is 40Hz to 20KHz, which indicates a much better definition on the lower register than many affordable bookshelf speakers.
The crisp sound across multiple genres is just one of the reasons why the Fluance Ai40 speakers are great to pair with a turntable. Their compact size and effortless setup and operation also add plenty of value.
But, what probably sets them apart besides the output and build quality is the 18 gauge internal lead wire. This is the component that significantly reduces signal loss or degradation, thus allowing you to enjoy a natural sound projection with minimal distortion.
13. Micca MB42
Already have your own receiver or amplifier? Take a look at these passive bookshelf speakers by Micca. The all-around sound is crisp and clear for such small speakers.
Keep in mind, though, that you do need your own receiver or amplifier to use them. Hopefully, your turntable already has a phono preamp built-in. In case it doesn’t, you need to make sure your receiver or preamp has a phono input with RIAA equalization in order to play records.
The MB42 is a two-way speaker with a 4” carbon fiber cone driver and a ¾” silk dome tweeter. The frequency response range is 60Hz to 20kHz, with the impedance is rated at 4 to 8Ω. They are inefficient at 85dB sensitivity so the volume will be lower. But don’t worry, just turn up the volume and they will sound great. These are passive speakers.
The MDF cabinets stand 9.5” tall, 6.5” deep, and 5.8” wide. They are rear-ported to extend the bass. Thanks to the compact size, these speakers can be placed virtually anywhere. The stealthy black finish and simple grills look elegant and will fit pretty much any décor.
The MB42 is an excellent option if you’re looking for quality, budget-friendly option.
14. Audioengine A2+
Audioengine offers a pair of speakers that are sleek and versatile. So, when you aren’t using them for your turntables, they can also double as your computer speakers. They’re small and unobtrusive to your room décor.
These speakers have a built-in digital-audio converter (DAC) to decode your digital audio sources when you’re not using your turntable. It also features 3 input types so you can plug in a variety of devices.
Don’t know much about speakers? Don’t worry, these are also newbie-friendly. And everything you need is included in the box.
These tiny 2-way speakers feature a 2.75” Kevlar woofer and a ¾” silk dome tweeter per side. While the amount of bass won’t blow anyone’s mind out, these speakers are designed for near-field listening and pinpoint imaging.
The built-in amplifier is rated at 15W per channel continuous and 30W max. The frequency response is 65Hz to 22kHz, which is surprising good considering the tiny 2.75” woofers.
The A2+ speakers come in with satin black MDF cabinets that are 6” height, 4” width, and 5.25” depth.
15. Elac Uni-Fi UB5
You can get these speakers in a standard or a slim format, depending on how much room you have. Elac opted for a three-way design for increased sound accuracy and a more extensive frequency response range.
Starting at 46Hz and going up to 25Khz, this frequency response range is ideal if you want more bass definition, crisp highs, and balanced midrange. These are the speakers you can use for any vinyl, any genre.
If money’s not a significant concern, then you might also appreciate the custom concentric drivers. The dedicated aluminum woofer is responsible for emphasizing the lower register and minimizing the harmonic distortion even at high volume levels.
I would also recommend these speakers to audiophiles and movie enthusiasts who want the home theater experience. The UB5s are quite versatile and also ruggedly built.
16. Edifier R980T
Whether you want to use these as PC, laptop, or turntable speakers, they’re among the most proficient small speakers around. They’re also quite cheap, so they might be your go-to choice if you’re shopping on a budget.
Although the 24W of total combined output may not sound like a lot, in small rooms and for specific genres, this is more than enough. I also like the fact that the flared bass reflex port does its job without adding unwanted buzzing, even though the R980Ts are not top-of-the-line Edifier speakers.
The wood finish looks beautiful and also improves the acoustic resonance. The control interface is simple, but enough for those with modest tastes. The control panel contains a master volume knob and a bass control knob. That’s more than enough to fine-tune the speakers if you don’t plan on hosting a party in a two-story living room.
I should also point out that the box contains all the necessary cables and that you can connect the speakers via a standard headphone output or a dual RCA output. That makes them compatible with most turntables on the market.
17. KEF Q100
Like the rest of KEF’s famous Q series. the Q100 comes with a Uni-Q driver with concentrically mounted 5.25” woofer and 1” aluminum tweeter. These are certifiable hifi speakers for those who don’t mind spending extra for the experience.
The frequency response is 49Hz and 40kHz. These bookshelf speakers can play really loud, as evidenced by the maximum output (SPL) of 107dB. These are non-powered (passive) speakers and KEF recommends that you supply 10 and 100W per speaker. The nominal impedance of 8Ω means they’re not difficult to drive.
The MDF cabinets are extremely well-braced – if you tap on the wood you’ll hear a nice and reassuring thud. Each speaker is 11.8” tall, 7.1” wide, and 10.7” deep. The available color options are black oak, linear white, European walnut, and rosewood, allowing you to match your Q100 to any room. They also come with simple and easily detachable grills.
A Detailed Buying Guide on Turntable Speakers
Now that you’ve seen a few of our top speaker picks for turntables, take a look at some more buying tips. Because, you don’t need to take my word for it. If you want to check out other options, keep these things in mind.
To Preamp or Not
You have a turntable, but do you have a phono preamp? Do you need one? If you plan on playing your music through speakers or headphones, you need one.
Fortunately, many turntables have a built-in phono preamp. If yours already has one, all you need to do is connect your turntable to your receiver or line preamp with a pair of audio cables terminated with RCA connectors.
Your turntable doesn’t have a phono preamp? Not a problem. You can connect your speakers in one of two ways:
- buy a receiver with a phono stage
- buy a separate phono preamp and connect it to your receiver
Why Do You Need a Preamp?
Think of the preamp as the sound bridge between your turntable and speakers. That bridge translates the sound signal that comes from your record groove to needle. From there it travels through your pre-amplifier and turns into something you can hear.
Passive vs Active Speakers
Do you need passive or active speakers? The answer may lay in your personal preferences.
For simple plug and play turntables, active or powered speakers are the easiest to use. You just plug the speakers into the turntable and you get instant music. How? Your amplification is already built into your speaker box.
On the other hand, passive speakers require an amplifier or receiver to hear your vinyl. One perk of getting passive speakers is the option to upgrade your amplifier later. Also, if you already have a decent rig and just want to add to it, you may already have one.
Another consideration is the space you plan on using your speakers in.
Bookshelf speakers are usually used for small to medium spaces. You may be able to stretch the sound to another room depending on your home acoustics. But don’t expect more than that without sacrificing sound quality.
Want to throw a house party? Your powered bookshelf speakers may not be enough and you may need a more powerful pair of speakers. Because they are meant to be used in small spaces, their frequency response is generally lower for maximum sound balance.
However, for casual listening on a lazy Sunday, powered speakers are a great option.
Did you finally find some speakers only to be disappointed by the way they sound? Your room or home acoustics may also play a part in that.
If you have a lot of hard or reflective surfaces in the room, your music may echo or even sound harsh. Some of the surfaces to watch out for are:
- Exposed windows
- Hardwood floors
- Tiled floors
On the other hand, rooms with thick carpets or drapes and over-cushioned furniture may have the opposite effect. Instead of sounding too sharp, you may hear it as flat instead.
The best setup is if your room has a mixture of both components. But unless your home is already set up like this you may have to switch it up yourself to achieve optimal sound.
When you are considering your turntable rig, you need to think realistically about space. For casual listeners, a suitcase-style turntable paired with a pair of active speakers may be the perfect option.
Active speakers don’t need additional speaker cables or components to play vinyl. And compact turntables can be stored away. So, if you’re pressed for space and your roommate is threatening mutiny if you bring in one more speaker, consider that option.
But, if you want to take the time to build your rig from the bottom up and have the space to spare, you may want to consider a full system (including a soundbar or a subwoofer) to go with your turntable instead. This may get pricey down the line, but you can always buy basic components like passive speakers and an amplifier first.
Breaking in Period for Speakers
Did you know that you need to break in your brand new speakers? Most people don’t. They just start it up and judge it by its first notes.
Why do you need to break in your speakers? Because those ridged parts haven’t moved before. So you want them to flex and move first.
Breaking in your speakers means playing something with a large dynamic range. Like a body flexing every muscle after hours of inactivity, you want your speakers to stretch their legs, or woofers.
How long does it need to play before it’s officially broken in? There’s no set answer for that. A few hours? Sure. But you may want to think days instead.
Don’t worry, though. You don’t have to keep them on the entire time. Just know that the more you use them, the better your speakers will sound.
Finally, you may be tempted to break the bank when it comes to buying the best speakers for vinyl. And you could if you aren’t careful, but you don’t need to go over budget to get great sound.
When you are playing vinyl, you may want to be close to the turntable to change out the record. So, more than likely you will be in the same room. That may automatically equate to smaller speakers like a bookshelf size.
Additionally, if you buy powered speakers you don’t have to worry about receivers or preamps. And that also may save you some money down the line. But remember that you need two speakers to play music in stereo.
If you like really bass-heavy music, you may want to invest in a sub to go with your bookshelf speaker. A good subwoofer can improve any bookshelf speakers by preventing their woofers from having to move excessively to produce low bass.
Buying the best speakers for record players to showcase your vinyl collection can be confusing. But it doesn’t need to be.
Because we all hear things differently, your perfect speakers may not sound the same to your neighbor. So, read reviews if you must, but the best judge will be your own ears.